Up to 75% cheaper than Dealership price.
All our abs are quality tested before getting shipped to the customer.
We ship used abs anywhere across the USA & Canada.
Our abs come with a warranty up to 2 Years with replacement or refund.
JASK Auto Parts Inc. has one of the largest selection of used and refurbished Anti-Lock Brake Pump Assembly which match stock OEM specs at prices often even lower than your next door junkyards/auto recyclers. Our inventory includes OEM(Original Equipment Manufacturer) pump assembly along with module that come on any car manufactured and sold in US/Canada. We are the most dependable supplier of ABS unit for replacement thanks to our more than ten years of industry expertise. All parts sold are guaranteed to fit and work and matched with dealer provided part numbers and carry a warranty to assure customers that if in case part doesn't work for them it can be easily returned.
When you order an used ABS unit they are tested before being getting shipped. We make sure they came out of good running cars and the part is functional. As a customer please make sure to provide the exact part number or other allied information like VIN# or picture of the part to help you find an exact match.
We specialize in used ABS Pump & Module for brands like Acura ABS, Audi ABS, BMW ABS, Chrysler ABS, Dodge ABS, Eagle ECM, Fiat ABS, Ford PCM, Geo ECM, Honda ABS, Hyundai ABS, Kia ABS, Infiniti ECM, Jeep PCM, Lexus ABS, Lincoln PCM, Mazda ABS, Mercedes ECM, Mercury PCM, Mitsubishi ABS, Nissan PCM, Plymouth ABS, Scion, Toyota ABS, Volkswagen ABS and GM ECM (including Buick, Cadillac, Chevrolet, GMC, Hummer, Isuzu, Oldsmobile, Pontiac, Saab & Saturn) models.
Additional Information:
To understand the needs of our customers and be their partner in the repair process of damaged vehicles.
Use latest software and updates from dealership to maintain top of the line interchangeability and direct replacement parts to all customers.
Position Jask Used Auto Parts Inc. as the premier parts supplier in both USA/Canada and be the one point of contact for all used auto parts that anyone may need.
Replacing Your ABS Pump
The ABS pump is in charge of pressurizing the ABS system, making sure that your car can change speed as necessary. It is an essential component of the entire ABS system, which works to reduce the risk of your brakes locking up and sending your automobile into a skid, especially when braking suddenly.
What are the symptoms of a potential ABS pump problem? The first and most noticeable instance is when your car's ABS system fails and a dashboard light appears. After that, it could be essential to check the engine's fault codes, which should reveal which ABS system component is malfunctioning and has to be replaced.
One of your car's more complicated responsibilities, it often requires a high level of competence and attention to detail. Not recommended for inexperienced mechanics or DIY people.
You'll need a socket set, spanners, and a laptop for auto diagnostics.
Locate the Control Module Codes to prepare the vehicle
To identify the proper codes that monitor and interact with the ABS controller, you should first utilize a vehicle diagnostic laptop that enables you to access the ABS system of your automobile. It is time to jack up the automobile and place it on jack stands once you have noted them.
Batteries and all fluid lines should be removed.
To reach the ABS pump more easily, you must next detach the battery. After doing this, empty the brake reservoir using the bleeding screw, get rid of all the old fluid, and make sure there are no spills in the engine bay. Next, loosen any wire and any lines entering the ABS system. You will need to carefully push these connectors out of the way, so take caution because they have a tendency to be rigid.
Remove the ABS Pump.
Inspect the ABS unit for the fasteners keeping it in place. Carefully unfasten each of them, then use a gentle motion to remove the ABS unit from its seat. If required, remove these components first since they can be in the engine and prevent you from removing the ABS unit, including the brake fluid sensor.
Disconnect the unit from the ABS pump.
The ABS pump should now be easy to remove from the device and replace with the new component. You should be able to finish this task quickly and away from the vehicle's primary body.
Install the ABS System again.
To reinstall the ABS unit in the automobile, perform the preceding instructions in reverse. Replace any other engine parts you removed to gain access to the ABS system, then gently slide it into place. After reconnecting all the cables and pipes to the ABS system, the vehicle should be mechanically ready to drive.
Conclusion
The final stages are to add fluid to the braking system and then bleed out any air in the system. Using the codes that you obtained from the system in step 1 along with the diagnostic laptop, make sure that the computer is synced up with the ABS pump after that.
You may be certain that you have properly changed the pump if, when you've done the task, there are no warning lights on the dashboard, no leaks from any of the braking piping, and the brake pedal feels nice and firm. It is generally advisable to do a thorough road test after fixing any braking-related component.
When you buy a used ABS Assembly from Jask Auto Parts, it comes with both ABS Pump and the Module.
We sell the entire ABS Assembly which includes both the Pump & Module. Since buying a module separately, may result in reprogramming of the module to match your existing ABS pump & vehicle. So we sell full assembly to avoid issues arising because of reprogramming.
Our sales representatives access live shipping rates to the customer's address and provide shipping solutions. Customers can choose to expedite delivery depending on the urgency or choose regular ground shipping. We as premium partners of UPS get over 40% discounted shipping costs and our usual shipping prices range only from $20-$45.
You can buy used ABS assembly or other auto parts by visiting our site and selecting the make, model, and part you need with other details to find your part. Or you can simply call us at 1800-790-9827 or text us at 616-341-7222 and our parts specialist will guide you through the process which is as simple as figuring out the correct part, getting prices, and making payments over the phone, via email invoice, and PayPal as well.
If the part you receive isn't working, or you have received a damaged one, you can easily return or replace it. Sometimes auto parts can get damaged in transit or just don't fit, whatever the reason, you can be at ease as we provide a full warranty with every auto part. You can get your money back or a replacement whatever you prefer. Just inform the respective sales representative that you have and they will assist you in getting a replacement.
JASK auto parts sells used auto parts for all brands make and models at a very affordable price. All our auto parts are tested and inspected before shipping and every auto part we sell comes with a warranty.
